Microtech Pressure Injection Fluid is suitable for use by pressure injection for the control of rising damp in masonry above ground level.
Microtech PIF is suitable for use by pressure injection for the control of rising damp in masonry above ground level.
All treatments should be in accordance with BS 6576:1985 (Code of Practice for the Installation of Chemical Damp Proof Courses).
In particular, the inserted DPC should be below the level of timber floors unless prevented by structural considerations (such floors should also be inspected due to the risk of fungal decay).
| Product Description | Microtech Pressure Injection Damp-proofing Fluid |
| Product Code | MICROPIF1LT |
| Packaging and Size | 2 litre Plastic Container, Makes 20 litres once diluted |
| Typical Coverage in 115 mm brick thickness | 7 linear metres |
| Typical Coverage in 230 mm brick thickness | 3.5 linear metres |
| Storage | Store below 30°C in a dry, well-ventilated area free from sources of ignition (Flash point 25°C) and out of direct sunlight. Store in a FROST FREE environment. |
| Shelf Life | 12 months when unopened, undamaged and stored correctly (Concentrate only) |
| Product Description | Microtech Pressure Injection Damp-proofing Fluid |
| Product Code | MICROPIF1LT |
| Packaging and Size | 2 litre Plastic Container, Makes 20 litres once diluted |
| Typical Coverage in 115 mm brick thickness | 7 linear metres |
| Typical Coverage in 230 mm brick thickness | 3.5 linear metres |
| Storage | Store below 30°C in a dry, well-ventilated area free from sources of ignition (Flash point 25°C) and out of direct sunlight. Store in a FROST FREE environment. |
| Shelf Life | 12 months when unopened, undamaged and stored correctly (Concentrate only) |
• A concentrated solvent-free microemulsion DPC system
• Advanced silicone microemulsion technology
• Fast injection rates (low surface tension)
• Rapid curing
• Virtually odourless
